Green hydrogen

Tata Steel Plans India’s First Hydrogen Production Facility Using Steel Plant Off-Gases in Odisha

Integrated steel plants produce several types of process gases, including blast furnace gas, coke oven gas and basic oxygen furnace gas. These gases contain varying concentrations of carbon monoxide, carbon dioxide, hydrogen and other constituents, depending on their source and the manufacturing process.

Tata Steel Limited has announced plans to develop India’s first hydrogen production facility using gases generated during steelmaking operations at its Kalinganagar plant in Odisha. The proposed project, developed in partnership with Houston-based technology company Utility Global, will explore an alternative approach to hydrogen production by converting carbon monoxide-rich industrial process gases into high-purity hydrogen.

Announced on 18 November 2026, the initiative is intended to demonstrate how existing steel manufacturing infrastructure can be used to produce hydrogen while supporting efforts to reduce industrial carbon emissions. The proposed facility will have a production capacity of 10 tonnes of hydrogen per day and will employ Utility Global’s proprietary H2Gen technology.

Tata Steel and Utility Global are preparing to undertake joint Front-End Engineering and Design (FEED) studies to assess the project’s technical and commercial feasibility. The findings will support a Final Investment Decision by Tata Steel’s Board, after which the companies may proceed with installation and operations at Kalinganagar.

The development represents an important initiative in India’s search for practical technologies capable of reducing emissions from energy-intensive industries such as iron and steel manufacturing.

Producing Hydrogen from Steel Plant Off-Gases

One of the distinctive features of the proposed project is its use of gases already generated during conventional steelmaking operations.

Integrated steel plants produce several types of process gases, including blast furnace gas, coke oven gas and basic oxygen furnace gas. These gases contain varying concentrations of carbon monoxide, carbon dioxide, hydrogen and other constituents, depending on their source and the manufacturing process.

Steel manufacturers commonly recover and utilise these gases for heating, electricity generation and other industrial energy requirements. Their utilisation helps improve energy efficiency by extracting value from materials generated during manufacturing.

Tata Steel’s proposed Kalinganagar project will investigate a different application by using carbon monoxide-rich process gases as an input for hydrogen production.

This approach could create an additional industrial use for existing gas streams while reducing the need to establish an entirely separate hydrogen production process based on conventional feedstocks.

The project is particularly significant because it seeks to integrate hydrogen production with the existing infrastructure of an operating steel manufacturing complex.

Utility Global’s H2Gen Technology

The proposed facility will use H2Gen, an electrochemical hydrogen production technology developed by Utility Global.

According to Tata Steel, the technology is designed to produce high-purity hydrogen from carbon monoxide-rich industrial gases.

Conventional water electrolysis produces hydrogen by using electricity to split water into hydrogen and oxygen. H2Gen follows a different electrochemical approach that utilises the chemical energy contained in industrial process gases.

The technology is intended to enable hydrogen production from suitable industrial gas streams without relying exclusively on conventional water-electrolysis arrangements.

Utility Global has previously demonstrated the technology using actual blast furnace gas at a steelmaking facility in Canada.

This earlier demonstration provides a technical foundation for examining its application at Tata Steel’s Kalinganagar complex.

However, demonstrating a technology under controlled or limited operating conditions differs from integrating it into a large industrial facility. The planned engineering studies will therefore be important in determining the requirements for continuous operation, equipment integration and commercial viability.

The project’s eventual environmental performance will also depend on factors such as energy consumption, carbon management and the treatment of gases produced during the electrochemical process.

Proposed Capacity of 10 Tonnes of Hydrogen Per Day

The Kalinganagar facility is being planned with a hydrogen production capacity of 10 tonnes per day.

At its proposed nameplate capacity, the facility would be capable of producing approximately 3,650 tonnes of hydrogen annually if operated continuously throughout the year.

Actual production would depend on operating hours, gas availability, maintenance requirements and the performance of the installed equipment.

The proposed capacity provides Tata Steel with an industrial-scale opportunity to assess the suitability of hydrogen production from steel plant gases.

The company has not disclosed a final project investment amount, construction schedule or commissioning date.

These details are expected to become clearer following completion of the Front-End Engineering and Design studies and a subsequent investment decision.

Engineering Studies Before Final Investment Approval

The partnership between Tata Steel and Utility Global is presently focused on Front-End Engineering and Design studies.

FEED studies form an important stage in the development of industrial projects because they establish the technical requirements, engineering configuration and preliminary financial parameters necessary for investment decisions.

For the proposed hydrogen facility, the studies will examine how H2Gen technology can be integrated with the existing steel plant infrastructure at Kalinganagar.

The assessment is expected to address equipment requirements, process integration, gas availability and the operational arrangements necessary for hydrogen production.

The studies will also help determine whether the technology can operate effectively within the complex environment of a large integrated steel plant.

Following completion of this engineering assessment, Tata Steel’s Board will evaluate the proposed investment.

If the project receives final approval, installation and subsequent operations can proceed in accordance with the approved development programme.

The 18 November announcement therefore marks the commencement of a detailed project evaluation rather than confirmation that construction has started.

Supporting the Decarbonisation of Steel Manufacturing

Steel production is among the world’s most energy-intensive industrial activities, largely because conventional ironmaking depends on carbon-based reducing agents and high-temperature thermal processes.

Reducing emissions from integrated steel plants requires a combination of technological improvements, energy efficiency measures, alternative fuels, resource recovery and changes in production processes.

Hydrogen has attracted considerable attention as a potential component of lower-carbon steelmaking because it can serve as a reducing agent in suitable ironmaking technologies and as an industrial energy carrier.

However, the environmental benefits of hydrogen depend heavily on how it is produced and subsequently utilised.

Hydrogen generated through processes involving fossil-derived industrial gases cannot automatically be classified as green hydrogen. Its carbon footprint must be assessed across the relevant production process.

Tata Steel’s proposed project is therefore best understood as an industrial hydrogen production and decarbonisation initiative rather than a conventional renewable-energy-based green hydrogen project.

The use of existing steel plant gases could provide opportunities for improving industrial resource utilisation, while the engineering and environmental assessments will determine its practical contribution to emissions reduction.

Tata Steel’s Broader Low-Carbon Technology Initiatives

The proposed Kalinganagar facility forms part of Tata Steel’s wider efforts to develop technologies for lower-carbon steel production.

The company has committed to achieving net-zero emissions by 2045 and is examining several approaches to reducing the environmental impact of its manufacturing operations.

Its technology initiatives have included trials involving hydrogen, coal-bed methane and biochar injection in blast furnaces.

These activities explore the possibility of reducing dependence on conventional fossil-based inputs while improving the efficiency of existing ironmaking processes.

In 2021, Tata Steel commissioned a carbon dioxide capture facility using blast furnace gas at its Jamshedpur steelworks.

That development demonstrated an approach to recovering carbon dioxide from industrial process gases and provided experience in technologies relevant to industrial carbon management.

More recently, in September 2026, Tata Steel commissioned a coke oven gas injection project at its Meramandali plant in Odisha.

The project uses coke oven gas as an alternative supplementary fuel in blast furnace operations, supporting efforts to improve resource efficiency and reduce reliance on conventional fuel inputs.

The proposed hydrogen facility at Kalinganagar represents another technological initiative within this broader programme of industrial research, operational improvements and lower-carbon manufacturing.

Odisha’s Growing Role in Advanced Steel Manufacturing

Odisha occupies an important position in India’s iron and steel industry because of its mineral resources, industrial infrastructure and concentration of major steel manufacturing facilities.

Tata Steel’s Kalinganagar complex is among the company’s principal manufacturing operations in India and produces steel for several industrial applications.

The proposed hydrogen project would introduce an additional technological capability at the site by examining the conversion of steelmaking process gases into high-purity hydrogen.

Such initiatives illustrate how established industrial complexes can serve as locations for evaluating emerging technologies before their potential application across other manufacturing facilities.

The integration of advanced chemical and electrochemical processes with traditional steelmaking infrastructure also creates opportunities for specialised engineering, process control and industrial research.

Successful implementation could provide operational experience relevant to the wider steel industry, although replication at other plants would depend on their individual gas compositions, infrastructure and commercial requirements.

International Technology Collaboration in Indian Manufacturing

The collaboration with Utility Global also highlights the role of international industrial technology partnerships in India’s manufacturing development.

Utility Global specialises in technologies intended to support industrial decarbonisation by transforming industrial gases and other process streams into useful products.

Its H2Gen technology is being evaluated for an application involving an operating Indian steel manufacturing facility.

For Tata Steel, the partnership provides access to a specialised electrochemical technology that can be assessed under real industrial operating conditions.

For Utility Global, the collaboration offers an opportunity to evaluate the commercial application of its technology at an established steelmaking complex.

The proposed facility will therefore involve both technology assessment and engineering integration.

Partnerships of this nature can contribute to the adoption of advanced industrial technologies in India while creating opportunities for domestic engineering participation and the development of specialised operating expertise.

Industrial Hydrogen and India’s Energy Transition

Hydrogen is becoming increasingly relevant to discussions surrounding India’s long-term industrial energy transition.

The National Green Hydrogen Mission has established a framework for encouraging renewable hydrogen production, supporting industrial applications and developing domestic manufacturing capabilities associated with hydrogen technologies.

At the same time, industries are exploring additional methods of hydrogen production that make use of existing industrial processes and feedstocks.

Tata Steel’s initiative represents one such approach.

Instead of establishing a standalone facility dependent entirely on an external hydrogen feedstock, the proposed project would use suitable gases generated within the steel plant itself.

This integration could support more efficient utilisation of industrial resources, subject to the project’s technical and commercial performance.

The development also broadens the range of technologies being examined by Indian manufacturers as they seek practical solutions for reducing emissions from existing industrial facilities.

A New Approach to Hydrogen Production in India’s Steel Industry

Tata Steel’s proposed hydrogen facility at Kalinganagar marks an important step in exploring the use of industrial process gases for hydrogen production in India.

The planned 10-tonne-per-day facility will combine Tata Steel’s steelmaking infrastructure with Utility Global’s H2Gen electrochemical technology to examine the production of high-purity hydrogen from carbon monoxide-rich off-gases.

The project remains subject to engineering assessment and final investment approval, with installation and commissioning dependent on the outcome of those evaluations.

Its significance lies in the effort to integrate emerging hydrogen technologies with existing industrial operations rather than treating hydrogen production exclusively as a separate energy-sector activity.

For India’s steel industry, such initiatives provide opportunities to assess alternative approaches to resource utilisation, industrial efficiency and emissions management.

As Tata Steel and Utility Global advance their engineering studies, the proposed Kalinganagar project adds another dimension to India’s expanding efforts in advanced manufacturing, hydrogen technology and industrial decarbonisation.

The initiative reflects the growing importance of technological innovation in building a more efficient, competitive and environmentally sustainable Indian steel industry.


Categories